What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

OTG multisensor (CO) IQ8Quad

802473

Approval: VdS

Multisensor fire detector with integrated smoke detector, heat detector and gas sensor (CO) for preventive and early detection of fires ranging from smoldering fires to open fires through combined evaluation of scattered light, temperature and gas. An alarm is actuated at carbon monoxide (CO) concentration levels that are life-threatening for humans. The detector is provided with an integrated isolator. A parallel detector indicator can be connected. Gas sensor (CO) helps to detect fire alarms, but can additionally serve to signal technical alarm when concentration exceeds safe value without fire situation.

Features & Benefits
Technical Data
Accessories
Documents

Additional Information:
In the course of installation, we recommend testing the integrated CO sensor with our CO test gas (Part No. 805583) or CO capsule (Part No. 805553).
Durability CO sensor: approx. 5 years
Technical alarm range CO: 10 ppm … 150 ppm

Gas sensors (CO) mainly react to the carbon monoxide arising from a fire (CO). They have, however, also a cross sensitivity to other gases, as for example hydrogen (H2), acetylene (C2H2) or nitric oxide (NO).

Special marking for gas detector on the light pipe: gold ring.

Scope of Delivery:
Detector base is not supplied as standard

Alarm current w/o communication curtain	approx. 18 mA
Application temperature	-20 °C ... 50 °C
Operating voltage	8 ... 42 V DC
CO alarm	approx. 100 ppm
CO pre-alarm	approx. 75 ppm
Color	white, similar to RAL 9010
Weight g	approx. 110 g
Storage temperature	-25 °C ... 75 °C
Air velocity	0 ... 25.4 m/s
Material	ABS plastic
Detector specification	EN 54-7/-5 A2 /-17, CEA 4021
Air humidity	< 95 % (non-condensing)
Quiescent current @ 19 V DC	approx. 65 μA
Quiescent current @ FACP battery	approx. 225 μA @ 27,5 V; approx. 360 μA @ 42 V
Type of protection	IP43 (with base + option)
Area to be monitored	max. 110 m²
Height to be monitored	max. 12 m
VdS class	F
VdS-Nr	G 205072
Dimensions	ø: 117 mm H: 49 mm (62 mm incl. base)

767800 Mounting bracket
805590 Standard detector base for IQ8Quad
805591 Detector base with relay contact for IQ8Quad

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

OTG multisensor (CO) IQ8Quad

802473

Features & Benefits

Technical Data

Accessories

Documents