What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

OTblue multisensor detector ES Detect

800375

Approval: G 213065

Multisensor detector with integrated optical smoke and heat sensor. The optical measurement chamber is equipped with a novel sensor which allows the detection of open fires, smoldering fires and fires with high heat. The classical ionization detector is replaced by these detection methods, especially in open fires. This detector is also capable of detecting test fires TF1 and TF6 described in the EN 54-9:1982. The OTblue multisensor is a fire detector with temporal signal analysis, weighted combination of sensor data, decentralized intelligence, automatic function self-test, automatic environmental adaptation, alarm and operating data storage and alarm display. A remote indicator can also be connected.

Features & Benefits
Technical Data
Accessories
Documents

System benefits:

Optimally matched to the ES Line system.
With multisensor detectors for the detection of all fires, even under the most difficult operating conditions
Up to 30 detectors per detection group.

Reliable detection:

Uniform response sensitivity of the detector for all different types of fire for the multisensor detectors
Large distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influences
Automatic adaptation to varying environmental influences
Electronic compensation of long-term influences of contamination or aging

Reliable false alarm suppression:

High reliability against false alarms by temporal evaluation of different sensor criteria
Exclusion of signal forms not typical of fires through special filter algorithms
Automatic self-monitoring of the detector electronics
Automatic self-monitoring of sensors for function and condition

Maintenance:

Designation of the heat detector by a black ring on the light pipe
Hours of operation, alarm and fault counter in each detector
Operation data retrieval of all detectors of a group with standard service PC and field bus interface
Detector LED for alarm display and as an identification display in the service (for maintenance with 8000 tools)

Wide range of accessories:

Standard socket and relay base
Socket adapter for ceiling installation
Dust caps optional for fire detectors and detector base
Kit for suspended mounting

Additional Information:
Special colors on request! In order to pass through existing wires, the WAGO grips (e.g., type 243-204 (O 0.5-1 mm) or 273/104 (0.75-2.5 mm²)), can be integrated into the detector base.

Scope of Delivery:
Detector base is not supplied as standard

Alarm current @ 9 V DC	typ. 9 mA
Application temperature	-20 °C ... 50 °C
Operating voltage	8 ... 42 V DC
Color	white, similar to RAL 9010
Weight g	approx. 110 g
Storage temperature	-25 °C ... 75 °C
Air velocity	0 ... 25.4 m/s
Material	ABS
Detector specification	EN 54-7/-5 A2, CEA 4021
Rated voltage VAC	9
Air humidity	< 95 % (non-condensing)
Quiescent current @ 9 V DC	approx. 35 μA
Type of protection	IP 43 (base + option)
Area to be monitored	max. 110 m²
Height to be monitored	max. 12 m
Dimensions	ø: 117 mm H: 49 mm (62 mm inkl. Sockel)

767800 assembly bracket
805590 standard IQ8Quad detector base
805591 detector base with IQ8Quad relay contact

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

OTblue multisensor detector ES Detect

800375

Features & Benefits

Technical Data

Accessories

Documents