What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

VESDA-E VES Scanner with LEDs

VES-A00-P

Approval: G 214010

The VESDA-E VES series of smoke detectors bring additional to the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection, a valve mechanism in the inlet manifold and software to control the airflow from the four Sectors (pipes). This configuration enables a single zone to be divided into four separate sectors, for example, distinguishing between separate aisles within a data room. Built on the Flair detection technology and years of application experience, VES detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VES delivers a range of revolutionary features that provide user value.

Flair Detection Technology
Flair is the revolutionary new detection chamber that forms the core of VESDA-E VES, providing better detection, fewer nuisance alarms, higher stability, increased longevity and particle characterization. Direct imaging of the sampled particles using a CMOS imager combined with multiple photo-diodes allow vastly more data that can be used to derive actionable information about the observed particles using analytics.

Features & Benefits
Technical Data
Accessories
Documents

Addressable sector detection for up to 4 pipes
Multi stage filtration and optical protection with clean air barriers
Four alarm levels and an ultra wide sensitivity range
USB for PC configuration, and firmware upgrade using a memory stick
Remote monitoring with iVESDA
Fully backward compatible with VLP and VESDAnet
AutoLearnTM smoke and flow
Extensive event log - 20 000 events

Operating voltage	18 ... 30 V DC
Alarm current @ 24 V DC	approx. 415 mA
Quiescent current @ 24 V DC	approx. 404 mA (fan speed 5)
Dimensions	W: 350 mm H: 225 mm D: 135 mm
Weight kg	approx. 4,3 kg
Air humidity	5 ... 95 % (non-condensing)
Ambient temperature	0 °C ... 39 °C
Aspirated air temperature	-20 °C ... 60 °C
Type of protection	IP40
Area to be monitored	max. 2000 m²
Contact load relay	2 A @ 30 V DC NO/NC
Alarm sensitivity	0.005%–20% obs/m (0.0016%–6.25% obs/ft)
Cable termination	0.2–2.5 sq mm
Max. single pipe length	280 m
Max. total branched pipe length	560 m
Specification	EN 54-20, Class A, B, C
Number of holes (A/B/C)	40/80/100

VSP-962 VESDA Filter for VEU, VEP, VES

Type	Name	Size
Promotional - Product Data Sheets
	Product Data sheet VESDA-E VES_Version: 01.2020	697 KB

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

VESDA-E VES Scanner with LEDs

VES-A00-P

Features & Benefits

Technical Data

Accessories

Documents

Promotional - Product Data Sheets