What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

IR3 flame detector RED, ATEX FM EN54

FSL100-IR3

FSL three-channel IR flame detector for recognition of quickly developing fires with flame development. The detector achieves a high level of resistance towards disturbance variables via threechannel infrared evaluation. It is suitable for most light industrial applications, storage areas and machinery. It is simple to install with Wide Field of View Solid 90 degree volume cone (Cone of Vision - Field of View), Long Range; 30m @ 10 sec for 0,1 m² n-Heptane reference fire and both automatic and manually initiated self-test. IP65 housing is made of Glass Reinforced Polyester (GRP). It is non-incendive, UV resistant, Self-Extinguishing V–0 (UL-94). Has proven exceptional resistance against acids, bases and solvents.

Features & Benefits
Technical Data
Accessories
Documents

Indoor & outdoor use
Zone 2/22 Ex proof
Hydrocarbon and non-hydrocarbon sources
Pressure compensation element, avoiding trapped moisture
Lightweight GRP housing with no grounding required
Selection of relay set-up with DIP switches
Ease of installation
Swivel mounting with fine angle adjustment
Light Mounting Bracket
Entry Gland
Advanced Test Lamp available

Range	max. 25 m110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0.1 m2)n-heptane fire
Cone of vision	90˚minimum horizontal and vertical
Power	10-28 VDC (12-24 VDC nominal)
Start up times	<10 sec
Alarm response time	8 to 30 sec
Alarm output settings	Selectable LEDs and relays latching/non-latching; factory setting: latching
Automatic & manual Self-Test	Automatic Sensor Test (built in Self-Test) and manual Self-Test
Operating current normal	25 mA at 24 VDC
Current in alarm, at 24 VDC	±75 mA at 24 VDC
Housing	Glass Reinforced Polyester (GRP), Non-incendive. UV resistant, Self-Extinguishing V–0 (UL-94)
Dimensions	4.9 x 3.15 x 2.25 in (125 x 80 x 57 mm)
Weight	1.05 lb (465 g)
Temperature, operating	–40 ˚F to +158 ˚F (–40 ˚C to +70 ˚C)
Ingress protection	IP65
Detector specification	EN54-10, FM3260
EC-type examination certificate	ATEX Zone2/22, FM Class 1, 2 & 3 Div2

FS1000-SM21 FSL100 Swivel mount.
FSL100-TL FSL100 Test lamp, incl. universal charger and carrying case; non EX

Type	Name	Size
Promotional - Product Data Sheets
	FSL100 Series Flame Detectors UV, UV/IR, IR3 Version: 11.2016	927 KB

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

IR3 flame detector RED, ATEX FM EN54

FSL100-IR3

Features & Benefits

Technical Data

Accessories

Documents

Promotional - Product Data Sheets