Ammonia NH3 Detector in IP 55 Dust-Proof Box 200PPM

VGS.DU-NH

Ammonia NH3 detector in dust-proof box. The electrochemical cell assures alarm signal through 4-20mA proportional output. Measure area 0 to 200 ppm. Can be connected to addressable control panel through suitable module. Can be used with relay board on double threshold control panel with pre-alarm 10mA and alarm 20mA.

• Self-diagnostic procedure to control the detector main operational parts, both hardware and sensing element
• Zero point tracking to compensate possible drifts due to thermal or physical variations of the sensor
• Digital filter employed in the digital analysis of the analogue values sampled
• Hysteresis cycle applied to the outputs to eliminate continuous switching
• Watch-dog for the microprocessor control.
Operating voltage
12-24Vdc
Power consumption
max. 180mA
Operating temperature
-10 ° C to + 55 ° C
Storage temperature
-25 / + 60 °C
Relative humidity
up to 90%
Proportional output
4-20 mA (default)
Relay output (optional)
10 mA (pre-alarm) / 20mA (alarm)
Weight
400g
Dimension (LxHxD)
106 x 180 x 62 mm
  • CAL-GAS 3 relay module for VGS Detectors Series
  • SKBR3N VGS Detectors Series calibration module