Dual input single output module

MI-D2ICMOE

The MI-D2ICMOE provide supervision of one input circuits respectively from external devices; it also provides an unmonitored single pole volt-free changeover contact for external devices. All modules feature a built-in short circuit isolator. Input channels are capable of both latched and analogue supervision: there are three separate latched states, normal, open circuit and combined alarm/short. The analogue supervision continuously monitors the supervised circuit, returning a signal proportional to the circuit resistance.

• Common mechanical platform for modules’ enclosure
• Low standby current
• FACP reads module power voltage
• High Power Loop 48V ready
• Built-in short circuit isolators
• Addressability through rotary switches
• Tri-colour Light Pipe
• Improved Light Pipe visibility on two sides
• Plug-in field wiring terminals
• Integrated DIN rail brackets
• Lasered engraved label data
• IP rate 30
• Intertek Approved
Operating voltage 15 ... 32 V DC
Maximum Standby Current
140μA at 24VDC no communications
Relay Specifications
2A at 30VDC, resistive load
Operation Temperature
-20°C to 60°C
Relative Humidity
5% to 95% (non-condensing)
IP Rating
IP30 (IP44 in M200E-SMB)
Dimensions (HxLxW)
22 mm x 82 mm x 93 mm including terminal block
Weight
118g
Maximum Wire Gauge for Terminals
2.5mm2